Necessary equipment Your pot of exfoliant, clay or powder A piece of fabric (a disc about 26cm in diameter) Cushion filling or old stuffed animal A pair of scissors A hot glue gun Thread and needle Precautions Before you start, remember to protect your work area well to avoid leaving glue marks or damaging your table. Remember to clean your empty pot or container thoroughly before you begin. The stages of the realization 1 - Start by washing your empty bottle thoroughly and removing the label. 2 - Cut a piece of fabric into a disc approximately 26cm in diameter. 3 - Place a handful of cushion filling in the center of the disc. If you don't have any, you can replace it with the inside of an old stuffed toy, for example. 4 - Close the fabric disc over it to obtain a sausage shape. 5 - Using a piece of string, close everything by making a tight knot. 6 - You can now customize the resulting ball however you like. Here we chose to make a cactus. We therefore sewed on a flower as well as small cotton stitches. 7 - Once the fabric part is finished, all you have to do is glue it to the aluminum or plastic lid (depending on the pot you have chosen to reuse). To do this, simply use hot glue and press firmly until the glue dries. 8 - Your needle holder is ready! All you have to do is put your needles in your box, close the lid and you will be able to stick your needles directly in the lid when you make your next DIY sewing projects! WAAM Tips You can also make this tutorial with a taller pot to store all your sewing essentials (needles, thread, buttons, etc.)
